Tii 95S Series User Manual download pdf

P/N 92230301 • Rev B• 4/2/2008

Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may be returned prepaid.

Model 95S Series

Customer Bridge Module

With Adapter Bracket

Installation Note

Description

1. A Customer Bridge Module (CBM) maintains a

constant direct connection between customer

and central office service provider. The CBM

is equipped with a customer test jack (See

Figure 1). Customer can insert the RJ-11 plug

from a working telephone into this test jack to

assure a signal is received from the central

office. This is the only time the customer is

disengaged from the central office.

Features

Figure 1

Installation

Installing Customer Bridge Module into TII NID

1. Hold CBM module with wires to the left.

2. Insert the CBM module locking hinge into

Network Interface Device (NID) locking tab

(See Figure 2).

Figure 2

3. Pull back NID retainer (See Figure 2) and slip

CBM front locating fingers (See Figure 3) into

the NID locating slot.

Figure 3

1 2 3

P/N 92230301 • Rev B• 4/2/2008 Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may b

Installing Customer Bridge Module into Alternate NID 1. Snap the adapter onto the CBM module (See Figure 4). Figure 4 2. With the CBM and adapt

Customer Telephone Wire Integrity Testing 1. Open customer security cover. 2. Using a working telephone, insert the telephone RJ-11 plug into the

Tii 95S Series User Manual